Jawaban Soal Mikrotik MTCNA Part 2


MTCNA (MikroTik Certified Network Associate) adalah sertifikasi networking pada level dasar (associate) yang diperuntukkan bagi mahasiswa/engineer/umum yang ingin mendalami Mikrotik.
Untuk mendapatkan sertifikat MTCNA peserta harus mengikuti dan lulus dari ujian sertifikasi MikroTik. Minimal peserta harus mendapatkan point 60% untuk lulus, apabila peserta mendapatkan point 50%-59% peserta akan diberi 2nd chance untuk mengulangi ujian, dan untuk peserta yang mendapatkan point dibawah 50% maka peserta akan dinyatakan gagal.



Berikut soal-soal yang sering keluar dalam ujian sertifikasi MikroTik MTCNA.

1. /interface wireless access-list is use for :
a. Shows a list of clients MAC address to permit/deny registered to AP
b. Autenticate Hotspot users
c. Handles a list of clients MAC address to permit/deny connection to AP
d. Contains the security profiles settings.

2. Collisions are possible in full-duplex Ethernet networks.
False
True

3. How many layers does Open System Interconnection model have?
a. 12         
b. 9
c. 6
d. 5
e. 7

4. It is impossible to disable user "admin" at the menu "/user
False
True

5. Is ARP used in the IPv6 protocol ? 
 False
True

6. Select valid SUBNET masks:
a. 255.192.0.0
b. 255.255.224.0
c. 192.0.0.0
d. 255.255.192.255

7. You need to reboot a RouterBoard after importing a previously exported rsc file to activate the new configuration.
True
False

8. What is the maximum number of ARP entries on a Mikrotik RouterOS device ?
a. Unlimited
b. 2048
c. 8192
d. 10240

9. What is term for the hardware coded address found on an interface?
a. IP Address 
b. Interface Address
c. MAC Address
d. FQDN Address

10. Which of the following protocols / port s are used for SNMP. (Simple Network Managemnt Protocol)?
a. TCP 161
b. TCP 162
c. UDP 161
d. TCP 123
e. UDP 162
f. TCP 25

11. How many usable IP addresses are there in a 23-bit (255.255.254.0) subnet?
a. 510
b. 254
c. 508
d. 512

12. How many different priorities can be selected for queues in MikroTik RouterOS?
a. 8
b. 16
c. 0
d. 1

13. How many bits are in a subnet mask for an IPV4 network ?
a. 16
b. none
c. 8
d. 32

14. Choose all valid hosts address range for subnet 15.242.55.62/27
a. 15.242.55.31-15.242.55.62
b. 15.242.55.32-15.242.55.63
c. 15.242.55.33-15.242.55.62
d. 15.242.55.33-15.242.55.63

15. Which of the following actions are available for '/ip firewall mangle' (select all valid actions)
a. change MSS
b. mark connection
c. Accept
d. Jump
e. Drop
f. mark packet

16. You need to set up an E1(T1) connection with PPP configured. Which License level is needed?
a. Level 4
b. It cannot be done in RouterOS.
c. Level 5

17. Which of the following is NOT a valid MAC Address? [multiple answers]
a. 95:B5D:EE:78:8A
b. 13:16:86:53:89:43
c. 80:GF:AA:67:13:5D
d. 88:0C:00:99:5F:EF
e. EA:BA:AA:EE:FF:CB

18. When sending out an ARP request, an IP host is expecting what kind of address for an answer?
a. VLAN ID
b. IP address
c. MAC Address
d. 802.11g

19. Which option in configuration of a wireless card must be disabled to make router to permit only known clients listed in the access list to connect?
a. Default Forward
b. Enable Access List
c. Default Authenticate
d. Security Profile

20. What is the default protocol/port of (secure) winbox?
a. TCP/8080
b. TCP/22
c. UDP/5678
d. TCP/8291

21. a backup file from a MikroTik router is stored in plain text format
False
True

22. NStreme works only on 40mhz Channel width
False
True

23. What kind of users are listed in the Secrets window of the PPP menu?
a. L2TP users
b. PPPOE users
c. Hotspot users
d. PPTP users
e. Winbox users
f. Wireless users

24. /interface wireless access list is used for
a. Handles a list of Client's MAC Address to permit/deny connection to AP
b. Contains the security profiles settings
c. Shows a list of Client's MAC address that are already registered at AP
d. Authenticate Hotspot users

25. Check the allowed input formats for wireless scan-list. 
a. 5500,5700
b. 5500 5700
c. 5500/5700
d. 5500 - 5700
e. 5500-5700


Subscribe to receive free email updates:

0 Response to "Jawaban Soal Mikrotik MTCNA Part 2"

Post a Comment